Friday, 28 December 2018

Industrial Smart Motor Market – Industry KnowHow By 2026

  December 28, 2018    No comments


Smart motor as the name suggests, is an intelligent device that can be programmed to adjust the speed and torque of a motor by altering the frequency and voltage supply. In traditional motors, mechanical elements are used to regulate the torque and speed of a motor. However, smart motors uses sophisticated power electronics to control position and speed of the motor as per application requirement. It includes a control unit, an encoder and an amplifier. All that is required for it to operate is power, and either an internal program, or serial commands from outside or both.
Smart motor functions combining the operation of variable speed drives, control unit, and motor thereby, providing integrating hardware and software and carrying out a process efficiently and effectively. Furthermore, smart motor offers smooth acceleration and deceleration to protect the system mechanics. In pumping system, smart motors are widely used to improve energy savings, reduce heat loss, and to control cooling water pumps.
Industrial Smart Motor Market – Trends and Opportunities
Industrial smart motors are becoming an integral part of industrial automation and robotic applications as they consume less energy than traditional motors and therefore are more efficient. Also, they offer multiple set point speeds and can be easily programmed to run at any one speed setting. And depending on the type of motor, their starting torque may be adjusted from around 30% to 300% or more.  Furthermore, since smart motors incorporate their own protection and control functions, the need for ancillary components in them is highly reduced. High speed and heavy load operations are specifically increasingly using smart motors to reduce power transmission leakage. Thus increase in adoption of smart motors in industrial applications such as material handling, pumps, conveyor belts, etc. is driving the industrial smart motor market across the world.
Higher cost as compared to traditional motors is expected to affect the industrial smart motor market especially in developing economies. However, with decreasing initial cost, the adoption of smart motor is anticipated to increase during the forecast period.
Request a PDF Brochure with Future Analysis @ 
Industrial Smart Motor Market – Segmentation
The industrial smart motor market can be classified on the basis of component, industry vertical, and geography. Based on component, the industrial smart motor market can be segmented into variable speed drive, intelligent motor control center, and motor. On the basis of industry vertical, the industrial smart motor market can be classified into power & energy, manufacturing, automotive, healthcare, and others. Based on geography, the industrial smart motor market can be segmented into North America, Europe, Asia Pacific (APAC), Middle East & Africa (MEA), and South America. Asia Pacific is expected to be the most attractive region for the industrial smart motor market owing to increasing industrial automation in manufacturing industries in the region. Also, rising awareness to improve productivity of manufacturing plants through efficient and economic smart motors and incorporation of smart manufacturing practices are the major factors driving the growth of industrial smart motors market in this region.
Read More

Automotive Water Valve Market – Competitive Analysis, Industry Dynamics & Estimation by 2026

  December 28, 2018    No comments
An automotive water valve is a pivotal component of the vehicle engine cooling and vehicle heating and ventilation (HVAC) system. This valve is responsible for proper management of liquid or coolant supply to the engine cooling system and HVAC system. The other applications of the water valve includes windshield wiper fluid control and radiator fluid control for commercial vehicles. Automotive water valves are made of either metal or plastic. A typical water valve performs three functions: start/stop, throttle, and non-return.
Rise in vehicle electrification is primarily driving the global automotive water valve market. Increase in electrification boosts the load over the vehicle engine, which in turn demands a proper cooling system. Therefore, a precise and accurate water valve is of high importance for the engine cooling system and HVAC system. The valve being used must be capable to withstand high pressure generated during peak demands. Essential properties of a water valve are resistance to oxidation, chemical stability to withstand variety of coolants, high strength to withstand high pressure, and long lifespan.
Development of lightweight materials, increased demand for vehicle HVAC and engine cooling, and integration of mechanical components with electronic features are expected to offer lucrative opportunities for the automotive water valve market. Asia Pacific and Latin America are witnessing a surge in per capita income, development of road infrastructure, and presence of global vehicle manufacturers. Consequently, demand for vehicles is increasing at a prominent pace across these regions. This is driving the global water valve market at a steady pace.
Request a PDF Brochure with Future Analysis @ 
The global automotive water valve market can be segmented based on type, material, sales channel, vehicle type, and region. In terms of type, the global automotive water valve market can be classified into three segments. Solenoid water valves are widely being utilized in automobiles for engine cooling and HVAC system. These valves are lightweight and easy to operate. Demand for these valves in the automotive industry is increasing due to their simplicity. Electric valves are generally of two types: always open or always close. These valves are operated by electric motors.
Read More

Automotive Labels Market To Hold a High Potential for Growth by 2026

  December 28, 2018    No comments
The automotive labels market is growing at a consistent pace because of increment in the demand for smart labels, for example, barcodes, QR codes, and RFID identifications so as to distinguish parts, safety information, and information in the automotive manufacturing. Automotive labels can be fitted on vehicles with no extra exceptional apparatus. The labels can be mounted effectively with the assistance of paste or bolts. Information on the labels should be visible and easy to understand, it tends to be composed with white on dark or the other way around. Automotive labels are mounted on the engine, motors, drive trains and chassis. Marks help effectively recognize the parts of the vehicle. These labels can be scrambled by codes, numbers, letter sets, or alphanumeric arrangement.
The global automotive labels market is seeing development because of the critical interest for labels and changing technical dynamics for smart labels and active labels during the forecast period. Increasing demand for radio frequency identification (RFID) labels and high growth in evolving economies are key drivers of the automotive labels market. Demand for eco-friendly label production techniques is also a major factor driving the automotive labels market.
Demand for eco-friendly label production techniques is also a major factor driving the automotive labels market. Automotive labels should be made with exactness and high caliber for their durability, as they need to withstand outrageous natural conditions. Rising raw material cost of labels, for example, metals, resins, polymers, and colors, acts as a restraint to the automotive labels market.
Request a PDF Brochure with Future Analysis @ 
The global automotive labels market can be segmented based on type, application, regions vehicle type, and sales channel. Based on type, the automotive label market can be classified into asset label, dome labels, marking labels, cautioning labels, and stock names. For distinguishing proof strategy for labels utilized are a hologram, barcode, RFID. Based on application, the automotive labels market can be isolated into Chassis Labels, Engine Component Labels, Interior Labels, and Exterior Labels.
Read More

Automotive Heated Steering Wheel Market – Forthcoming Developments, Business Opportunities & Future Investments

  December 28, 2018    No comments
Automotive heated steering wheels are additional comfort feature equipped in vehicles. Moreover, heated steering wheel is mounted in premium segment vehicles; however, they are currently available in some standard segment vehicles too. Heated steering wheels are mostly provided in vehicles launched in Europe and North America owing to the extreme cold weather experienced in these regions. An automotive heated steering wheel comprises a heating element within the steering wheel, which enables the heating process of the steering wheel when the ambient temperature in the vehicle is low.
The automotive heated steering wheel market is anticipated to expand significantly during the forecast period owing to the rise in demand for comfort and enhanced driving conditions in the vehicle. The automotive heated steering wheel market in extremely cold regions, such as Europe, is expected to expand at a significant pace. Furthermore, vehicles with highly efficient HVAC systems are likely to hinder the automotive heated steering wheel market owing to their high potential to maintain the temperature of the vehicle’s cabin in very short duration of time. Therefore, manufacturers don’t prefer the heated steering wheel due to the high power consumed while raising the temperature of the steering wheel.
The global automotive heated steering wheel market can be segmented based on sales channel, vehicle type, and region. In terms of sales channel, currently, the OEM segment is likely to hold a major share of the market, as the technology is penetrating the market. Additionally, the segment is likely to expand at a significant pace, as it is a cost-effective method to heat the steering wheel, which makes the driver more comfortable when the ambient temperature is low.
Request a PDF Brochure With Future Advancements @ 
However, the aftermarket segment is expected to expand at a significant growth rate during the forecast period as very few manufacturers are providing heated steering wheels in their vehicles, despite being a cost effective feature. Therefore, the aftermarket segment is projected to expand during the forecast period.
Read More

Automotive Center Console Market Trends, Shipment | Industry Forecast 2026

  December 28, 2018    No comments
The automotive center console is a storage compartment situated within the center front portion of a vehicle. In between the front passenger seat and driver’s seat the center console is located. The center console portion begins from dashboard and seamlessly integrates with the transmission panel and ends up in between the driver and front passenger seats. It is utilized in completely different patterns looking on the type of vehicle or class of the vehicle. The automotive center console accommodates many options like controllers, storage pods, charging ports, audio controls, and even displays are placed in center console. In some vehicles, the storage pods within the center console have a temperature adjustment feature, to keep eatables and beverages at a selected temperature.
The global automotive center console market seeing noteworthy development, as the automobile sector is extending at an impressive pace and some prominent players in the vehicle market are upgrading their ability of production. Rise in demand for extravagance and superior vehicles is likewise foreseen to fuel the automotive center console market amid the forecast period. Innovative improvements in the automobile division enable makers to complete innovative work and make safe, better and advance center consoles. Increase in mobility and adaptation of electronics in automobiles, keeping in mind the end goal to build comfort and give new accessories, is also projected to boost the center console market during the forecast period. Utilization of smart glass technology in the center console is a key trend that is relied upon to help the market in the near future.
However, a developing preference for connecting front slang seat may limitation the development of the automotive center console market during the forecast period. As the front passenger seat and driver seat will be connected at that point space for the center console will lessen.
Request a PDF Brochure with Future Analysis @ 
The global automotive center console market can be segmented based on vehicle type, sales channel, and region. Based on vehicle type, the automotive center console market can be bifurcated into passenger vehicle, commercial vehicle, and electrical vehicle. Besides, the passenger vehicle segment can be partitioned into the hatchback, sedan, a SUV. Passenger vehicles are furnished with several smart components, like smart controllers, which give access to several cabin features. Due to increase in demand for passenger vehicles the demand of center console market is expected to expand during the forecast period. Technological advancements in commercial vehicles are anticipated to boost the automotive center console market during the forecast period.
Read More

Automotive Door Handle Sensors Market | Detailed Analytical Overview by 2026

  December 28, 2018    No comments
Automotive door handle sensor technology integrates various keyless access functions into a door handle. Automotive door handle is a keyless system comprises of an electronic locking feature which acts as a key. The keyless system provides secure access to the vehicle electronically and also substitutes the conventional mechanical key. This increases user comfort and makes entering the vehicle easier. These types of door handle operate on very low frequency transmitting antenna placed inside and outside the vehicle.
The global automotive door handle sensors market is driven by the growth of the industrial and automotive sectors. Increase in demand for mobility and connectivity in consumer electronics and testing services is another factor propelling the global automotive door handle sensors market. Rise in deployment of safety systems in automobiles is also projected to drive the uptake of these sensors in the next few years. High initial investments and the volatile market dynamics are anticipated to create obstructions in the otherwise steady growth trajectory.
The global automotive door handle sensors market can be segmented based on type, vehicle types, sales channel, and region. In terms of type, the global automotive door handle sensors market can be bifurcated into button and induction. The button type door handle sensor is an older technology, wherein a button is placed on the handle for locking and unlocking. The induction type door handle sensor is integrated in a lever which is used to unlock the vehicle. Sensors are integrated in these systems to increase convenience and reduce effort. The sensor can be accessed remotely through mobile devices, keys, remotes, etc. or operated biometrically.
Request a PDF Brochure with Future Analysis @ 
Based on type of vehicle, the global automotive door handle sensors market can be classified into passenger vehicles and commercial vehicles. Increase in demand of passenger vehicles due to rise in per capita income, rapid urbanization, and growth of the automotive industry in developing countries is expected to drive the passenger vehicles segment.
Read More

Paper Embossing Machine Market – Business Strategies, Revenue Generation, Market Shares & Latest Development

  December 28, 2018    No comments
Globally, the paper embossing machine market is growing substantially, due to the rise in the consumer products available in hypermarkets and supermarkets. Embossing is the technique which is used to create recessed relief images and designs on paper and other materials. The paper products are first embossed with a paper embossing machine and then it is sold to customers. In today’s world, advertisement and brand image enhancement are crucial techniques to ensure good consumer engagement. Therefore, embossing is an efficient way to enhance product appeal, as well as engage consumers. Embossing is a great way to add texture and dimension to scrapbook pages, homemade cards, and others.
Paper embossing machine is used give a shape on the surface of paper through which the consumers are likely to be attracted towards the product, which leads to increase in the sales of that particular product. The embossing of paper is done to attract the consumer towards the product which increases demand for the product. Paper Embossing Machine is widely used for embossing on the surface of aluminium foil for tobacco packaging, and packaging paper boxes, among others. Therefore, it is anticipated that the outlook for the global paper embossing machines market will remain largely positive during the forecast period.
The growing consumption of paper & paperboard products is one of the prime factors that is fuelling the growth of the global paper embossing machine market. Paper is estimated to be the fastest growing product segment. Due to the rise in the hypermarkets and supermarkets, it is anticipated that paper packaging will face sizeable demand, in the next ten years, especially in the emerging economies.
Request a PDF Brochure with Future Analysis @ 
The increase in demand for economic and ecological advantages by the paper & pulp manufacturers is further fuelling the need for the paper embossing machine. Brand enhancement and product attractiveness are some of the critical factors, which are desired by packaging manufacturers, and are driving the growth of the global paper embossing machine market.
Read More

Collagen Market-By Source (Pig, Poultry, Cow, and Marine), By Product (Natural, Hydrolyzed and Gelatin), By Application (Cosmetics, Healthcare, Food and Beverage), and By Region-Forecast 2022-2031

SDKI Inc. published a new report on the collagen market on January 25, 2022.  This study includes the statistical and analytical approaches ...