Air Management Systems Market Business Tactics, Company Profile & Growth Forecast Till 2025

The major advantage of market for air management systems is the technological enhancement in air traffic. The enhancement of technologies in the air management is resulting in efficient performance of air management systems. The up gradation of conventional sensors with latest sensors which results in accurate results, and technologically robust heat exchangers is also helping in coherent performance of the aircraft, thus helping the air management system to perform smoothly. 

Moreover, the growing use of electronics and electrical systems in the aircrafts is demanding for more efficient thermal management system. The increased usage of electronics and electrical systems in an aircraft results in increased heat loss, which hampers the system’s performance. Thus, the enhanced thermal management system on an aircraft can reduce the heat loss which in turn increases the performance, and hence helps the market for air management system to surge over the period.

The major restraining factor for the air management system is the challenge faced during modernization of older aircrafts with the latest technologies. The installation of technologically advanced systems of an aircraft in order to modernize the aircraft is a major challenge for the aircraft companies. Owing to this fact, the backlog of modernization of aircrafts in the commercial as well as in military forces is increasing, which is impacting negatively on the growth of the market for air management systems.

The air space in the emerging nations is witnessing a significant surge in the business or private jets. The increase in business jets is demanding for more robust technologies in order to have a safe flight operation. This factor is anticipated to drive the market for air management systems heavily in the coming years.

Request PDF Sample - https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=29009

The market for air management systems is segmented on basis of systems, components, platform and geography. The various systems used in air management systems includes, thermal management systems, engine bleed air systems, oxygen systems, cabin pressure control systems, fuel tank inerting systems and ice protection systems. The thermal management systems is further segmented as air conditioning systems, supplement cooling systems, fluid and hydraulic cooling systems. The oxygen systems is sub segmented as continuous flow systems, pressure demand systems and portable oxygen systems. The ice protection systems are de-icing systems and anti-icing systems. 

The thermal management systems led the market for air management systems globally in 2016. The different components used in an air management systems are fixed oxygen generation systems air cycle machine, air separator market, heat exchangers, and air mixer among others. As the fixed oxygen generation systems is used to supply pressurized air to the aircraft cabin, the segment is an essential component, and due to this, the segment dominated the market in 2016. Based on platform, the air management market is segmented on basis of fixed wing aircrafts, and rotary wing aircrafts. The fixed wing aircraft segment is further segmented as commercial fixed wing aircraft and military fixed wing aircraft. 

Read More

Spotting Scope Market Comprehensive Study Explored In New Research With Key Players

Spotting scope helps to enhance one’s aim by pinpointing and magnifying a target. Based on product types, the market is segmented into angled body spotting scope and straight body spotting scope. In 2016, among the various product types, angled body spotting scope segment dominated the market followed by straight body spotting scope. 

In addition, angled body spotting scope is also expected to grow at the highest rate for the coming years. Increase in the demand angled body spotting scope from various military agencies is one of the major factor fuelling the demand of the spotting scope market for the forecast period. Increase in use of spotting scope in shooting sports and hunting is one of the key factor fuelling the demand of spotting scope market for the forecast period.

Based on application, the market is segmented into military, hunters, bird watches and others. In 2016, among the various application, military segment dominated the market followed by hunters. In addition, military is also expected to grow at the highest rate for the coming years. Military up gradation programs is the major driver driving the market for the military segment in spotting scope during the forecast period. Technological advancement in the spotting scope is one of the major key factor fuelling the demand of the spotting scope market for the forecast period of the 2017 – 2025.

Request PDF Sample - https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=28982

Based on end user, the market is segmented into defense & law enforcement and civilian. In 2016, among the various end user, civilian segment dominated the market followed by defense & law enforcement. In addition, defense & law enforcement is also expected to grow at the highest rate for the coming years. Increase in the interest in bird watching and hunting is the major driver driving the market for the spotting scope for the forecast period. Easy availability of spotting scopes through various channels such as online shopping websites is one of the key factor boosting the market for the spotting scope during the forecast period.

Advancement in riflescope technology for precision attack, increase in the use of spotting scope in hunting and up gradation of military programs are some of the key factor fuelling the demand of the scope spotting market during the forecast period of 2017 – 2025. However, ban on hunting in some part of the globe is one of the major restraint restraining the market for the scope spotting during the forecast period.

Read More

Soldier Monitoring Systems Market Explores New Growth Opportunities from 2020 to 2025

The growing need to focus on reducing soldier casualties and enhancing soldier capability, is impacting positively on the growth of the market for soldier monitoring systems. The increase in terrorism and cross border insurgencies led to increase in soldier casualties, which in turn compelled the defense forces and defense contractors to develop the soldier monitoring systems. The concern to reduce soldier casualties during combat, is driving the market growth. Moreover, the global defense forces are constantly focusing on modernizing their military troops in order to enhance their strength during combat. This factor also led the soldier monitoring systems market to surge over the period.

The key factor restraining the market for soldier monitoring systems to grow over the period is the lack of technological awareness among the soldiers. The soldier monitoring systems are technologically enhanced and robust systems, which is limiting the soldiers to adopt the up graded systems, hence inhibiting the market to grow over the years. In addition, the declining defense budgets in developed nations is also impacting negatively on the market growth. This is attributed to the fact that, as declining defense budgets results in less procurement of technologically advanced systems, thus, hindering the growth of the market in the future.

The rising need for better and efficient soldier systems in the developing nations is expected to drive the market for soldier monitoring systems in the coming years. The defense forces in the developing nations are increasing adopting these technologically advanced soldier monitoring systems in order to strengthen their armed forces and reduce casualties during combat. This factor is acting as an opportunity for the soldier monitoring systems market in the coming years.

Request PDF Sample For More Information@ 

https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=28958

The market for soldier monitoring systems is segmented on basis of materials, subsystems, application and geography. The different materials used to manufacture soldier monitoring systems are steel, composite ceramic, Kevlar or aramid, ultra-light weight polyethylene and others. The different subsystems of soldier monitoring systems are helmets, vests, exoskeletons, devices and advanced personal clothing. The helmets segment is sub segmented as advanced combat helmet, personal armor system for ground troop helmet, light weight helmet, and modular integrated communication helmet. 

The most prominent helmet segment used by the defense forces across the globe accounted for modular integrated communication helmet, while the advanced combat helmet is gaining the interest among the defense forces due to various advantages. The various types of vests on which soldier monitoring systems are integrated are interceptor body armor, personnel armor systems for ground troops, ranger body armor, and interim small arms protective over vest. 

Read More

Tea Processing Machine Market Trends and Research Insights by 2027

• Tea is the second largest beverage consumed globally after water. The method and type of tea consumption varies across regions.
• Non-fermented, semi – fermented, fermented, and water soluble tea are the four major types of tea. The manufacturing process of each of these tea types differs based on chemical, physical, and thermodynamic conditions.
• Tea processing involves various stages such as weathering, rolling, drying, sorting, and fermentation.     
• Continued growth in tea consumption, particularly in Asian and Middle Eastern regions is likely to significantly drive the production demand, subsequently influencing growth of the tea processing machine market
• Some of the commonly used tea processing machines include sorting machine, orthodox machine, fiber extractor, CTC tea processing machine, dryer, and roller.

Automation of tea processing machines to drive the global tea processing machine market

• Myriad variations of teas are available in the market, and tea brands globally are evolving further in terms of introducing innovative flavors. This in turn has become challenging for manufacturers to produce different varieties of teas.
• Manufacturers can easily produce a variety of teas on a large scale with the introduction of automation in tea processing machines, without hampering their quality and at the same time reducing the operation cost by lower labor involvement.  

Looking for Regional Analysis or Competitive Landscape in Tea Processing Machine Market, ask for a customized report

Growth of small scale tea processing plants to offer significant growth opportunities

• Various small scale tea manufacturers across the globe are sourcing tea processing machines that are more efficient and enable them to scale up their production capabilities
• Emergence of novel and technologically advanced tea processing machines is expected to generate growth opportunity in the coming years

Limited tea producing regions to restrict market growth

• Limited tea producing estates are found across the globe, and the tea market is also relatively consolidated with fewer brands leading the market
• With such limited scope, tea processing machine manufacturers face challenges in terms of geographic expansion, and higher bargaining power of buyers.

Read More

LED Agricultural Grow Lights Market Trends, Opportunities and Forecast to 2027

• Growing demand for urban farming has led to increased usage of LED agricultural grow lights. The grow lights are an artificial light source used to stimulate the growth of plants for indoor cultivation. The tree types of grow lights available in the market include fluorescent grow lights, LED grow lights, and high-pressure sodium grow lights.  LED grow lights are more energy efficient than the other two types. These grow lights are also known as plant lights. Growth of vertical and indoor farming is expected to fuel the LED agricultural grow lights market across the globe.

Growth in Agricultural Industry Expected to Fuel the Global LED Agricultural Grow Lights Market

• Light emitting diode bulbs are energy saving alternatives to other light sources. These days, people are increasingly inclined toward vertical and indoor farming where the use of LED agricultural grow lights is growing considerably. Growth of urban farming is expected to lead to increased usage of LED grow lights. People are currently more focused on technology driven objects. Growing demand for fresh and nutritious vegetables has fueled the indoor farming sector which is expected to boost the LED agricultural grow lights market. The market is likely to expand significantly due to major growth of the agricultural industry.

Rising Usage in the Poultry Sector to Drive the LED Agricultural Grow Lights Market

• Lights plays a major role in production in poultry farming. Poultry farmers use the LED lights for better growth of the chicken. Chicken raised using LED grow lights are found to produce higher quality and quantity of eggs. Though LED grow lights are costlier, they offer better performance than other grow lights. Many urban farmers are seeking energy efficient lights for farming. This is likely to fuel the LED agricultural grow lights market globally.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

Asia Pacific to Lead the Global LED Agricultural Grow Lights Market

• In terms of region, the global LED agricultural grow lights market can be divided into North America, South America, Europe, Asia Pacific, and Middle East & Africa.
• Europe includes country-level analysis for U.K., Germany, France, and Rest of Europe. North America includes Canada, U.S., and Rest of North America. The South America LED agricultural grow lights market is segmented into Brazil, and Rest of South America. Analysis and forecast of the LED agricultural grow lights market in Asia Pacific features India, China, Japan, and Rest of Asia Pacific. Middle East & Africa covers the LED agricultural grow lights market analysis for GCC countries, South Africa, and Rest of Middle East & Africa.
• The market in Asia Pacific is likely to witness the maximum demand for LED agricultural grow lights from 2019 to 2027 followed by North America.
• Leading manufacturers of LED agricultural grow lights have extensive distribution networks along with deep product penetration. Manufacturers are focusing on innovation in their product portfolio and manufacturing agricultural grow lights which can be used for longer duration with more innovations.

Read More

Marking Devices Market Trends and Research Insights by 2027

• Marking devices are used to reveal an image at the bottom of a product such as date and number stamp, serial number, and inspection stamp through various methods such as laser, burn, inkjet, chemical, thermal transfer, and rotary pad printing
• Marking machines are used to draw images on materials such as alloys, black paper, ceramic, ebony, polymers, glass, leather, polycarbonate, metals, plastics, precious stones, rubber, silicon, textiles, and wood.
• Marking devices provide faster, accurate, and permanent marking solutions for metals and non-metal units. Several sectors use a marking device to mark component labeling, serial number, barcodes, date codes, and individual part numbers.
• The global marking devices market is projected to expand at a rapid pace during the forecast period due to increasing demand for marking devices from different industries active in the medical and automotive sector.

Global Marking Devices Market: Key Drivers

• Increasing government regulations for UDI (Unique Device Identification) so that identification tasks become important for manufactures is the major factor projected to propel the market growth in the next few years.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

• Rise in demand for laser marking devices is expected to fuel the growth of the marking devices market globally. Laser marking devices mark serial numbers on an object by using laser beams, which makes the challenging task of marking on medical devices, easier. Thus, laser marking devices are widely used for as marking on medical devices.
• Furthermore, rising demand for marking devices from aerospace, packaging, electronics, automotive, and other industries to mark component labeling, serial numbers, barcodes, date codes, and individual part numbers is expected to fuel the demand for marking devices.

Read More

Electrohydraulic Pumps Market Technological Innovations and Future Opportunities 2027

• Electrohydraulic pumps (EHP) are the advanced version of the hydraulic pump, which reduces emissions and fuel consumption. Electrohydraulic pumps are primarily designed or developed for all electric mobile applications and hybrid electric applications.
• Electrohydraulic pump systems comprise an electric motor directly joined to a hydraulic pump, which is controlled through a high performance mobile hardened drive.
• The global electrohydraulic pumps market is predicted to expand at a rapid pace during the forecast period owing to increased demand for electrohydraulic pumps in different applications such as electric power steering, and electro-hydraulic systems and circuits.

Key Drivers of the Electrohydraulic Pumps Market

• Increasing shift toward electrohydraulic pumping units has impelled growth in the electrohydraulic pump market. This in turn is expected to propel the demand for electrohydraulic pumps in the next few years. This is primarily because the mobile hydraulic systems use a gas or diesel engine along with hydraulic pump; thus, it reduces fuel consumption and carbon dioxide emission.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

• Additionally, equipment manufacturers are also shifting toward electrohydraulic solutions, which is expected to fuel the market in the forthcoming years. This is mainly because electrohydraulic pumps are up to 80% more efficient than their traditional counterparts.
• Electrohydraulic pumps provide power-on-demand functionality i.e. the electrohydraulic motor pump only spins when flow and pressure are required for work functions. This is another major factor expected to fuel the electrohydraulic pumps market globally.
• Electrohydraulic pumps have the ability to control the amount and direction of hydraulic flow by controlling speed and direction of the electric motor. This is the major factor anticipated to propel the electrohydraulic pump market globally.

Read More

Wind Tunnel Market Trends, Share, Scope, and Research Insights by 2027

• A wind tunnel is a device or equipment used in aerodynamic research to study the effect of movements through air or resistance to moving air on the models of spacecraft or aircrafts.
• A wind tunnel comprises a tubular passage with the object under test mounted in the middle.
• Wind tunnels are large tubes or simply a hollow tube, which is used to replicate the actions of the objects moving along the ground or flying through the air.
• Wind tunnels also comprise sensors that are used to provide solid data regarding an object’s contact with air.
• A wind tunnel consists of mainly five parts that includes the contraction cone, the settling chamber, the diffuser, the test section, and the drive section.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

Key Drivers of the Wind Tunnel Market

• High demand for wind tunnels for automotive testing and testing of commercial aircraft is expected to drive the growth of the wind tunnel market across the world.
• Rising demand for wind tunnels in aerospace & defense is expected to impact the market throughout the forecast period. Wind tunnels are largely used for testing aircrafts in the aerospace & defense application segment, as these aircrafts are mostly bare in critical climatic conditions. This in turn is expected to accelerate the growth of the wind tunnel market during the estimated period 2019-2027.    
• Furthermore, increasing demand for UAVs from the military and commercial sector, and expansion of new generation high speed aircraft, missiles, and railways, is expected to boost the growth of the wind tunnel market across the globe.

Read More

Hasp Padlock Seals Market Competition To Heat Up With Innovative Technologies Going Mainstream Globally

An increase in the crime rate of theft and tampering has resulted in overall business losses in the past many years. This has raised the concern for safety and security among the users in diverse business i.e. aviation, banking, manufacturing, supply chain solutions and many similar. Hasp padlock seals help the users to prevent theft & tampering either accidentally or intentionally.  

The demand for security and safety has driven the sale of the hasp padlock seals market, especially in the aviation industry especially in the passenger transport, as it has been mandatory to lock the passengers’ luggage to lock with either hasp padlock seals or any similar security sales.

Hasp Padlock Seals Market: Dynamics

The increasing crime of shoplifting has made a momentum for the demand of hasp padlock seals in all the regions of the world market. Hasp padlock seals helps lock the bags carried by the patron to ensure its locked and none can take any product purposely for all the products that have to be kept in the retail outlet. The application of Hasp padlock has increased in the aircraft for the sealing purpose of small openings such as drinks lockers and catering, sealing of refrigerated truck, ATM cassette seals and seals for cash boxes especially used in cash machines.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

Hasp padlock seals caters to the needs of pharmaceuticals, food & beverages, mass merchandise outlets, apparel & fashion accessories stores. Hasp padlock seals market is anticipated to cater to the needs of administrative & regulatory bodies to use hasp padlock seals to avert theft, tampering and unauthorized access especially to provide tamper-evidence for smaller aperture applications such as drums, airline carts, utility meters & many others. The United States of America bore a loss of US$ per shoplifting incident in 2018 was around $559, thus making the demand for hasp padlock seals at the global market to fight against shoplifting. 

Plastic material is anticipated to capture the major share of the hasp padlock seals market. Hasp padlock seal is anticipated to be in great demand in the upcoming market especially in transportations, logistics, packaging in commercial & retail industries that would fuel the demand for it. Hasp padlock seals can now be barcoded with unique numbers for fast, accurate reliable data capture and streamlining operations & extra numbering at meeting line between the white cover and housing prevents substitution of parts.

Read More

Champagne Bottles Market Trends and Research Insights by 2027

Premiumization is not a new trend, but it has played an important role in shaping the beverage industry. Consumers are nowadays willing to pay more for better quality, uniqueness, and pleasant consuming experience. Rising consumption of premium sparkling champagne across the key economies are expected to trigger market growth its packaging across the forecast period.  

Champagne bottles are manufactured from glass as believed that glass delivers a genuine taste of beverage and also preserves its quality. A classic bottle of champagne has carrying-capacity of 0.75 liters, whereas, magnum with capacity 1.5 liters making it the perfect size for festive gatherings and parties. Also, for some striking occasions, there are high-capacity champagne bottles, with holding capacity ranging upto 30 liters or 40 standard champagne bottles.

Overall, the global viewpoint for champagne bottles market is expected to remain positive during the forecast period.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

Champagne Bottles Market - Dynamics

Increasing penetration premised high-end alcoholic beverages in the emerging economies is anticipated to be a key driver for the growth of the global champagne bottles market. Consumer inclination for consumption of premium sparkling (carbonated) wine is rising due to altering drinking habits, changing lifestyles, and speedy urbanization, particularly in emerging economies. 

Furthermore, consumption venue such as “drinking in” has displayed a steep growth outpacing “drinking out” owing to myriad factors including competitive retail landscape and others is strengthening the demand for target market. Innovation in designs & patterns for bottle corks are likely to offer added security as well as enhances bottling outlook for champagne packaging.

These factors are expected to trigger demand for global champagne bottles market in coming years.

Looking for Regional Analysis or Competitive Landscape , ask for a customized report

Champagne Bottles Market - Segmentation

The global champagne bottles market is segmented by champagne bottles size, bottle cork size, and sales channel. The pricing for champagne bottles has being done based on champagne bottles size segment in US$ million, and the volume is considered in units.

Read More

Window Cake Box Market - A Latest Research Report to Share Market Insights and Dynamics

Boxes are the most preferred packaging format for storing cakes. Transparency of a package is often perceived as an indication of the quality of the product.  Thus, window cake boxes are used for the packaging of cakes. These boxes are suitable for the packaging of bakery goods where product differentiation is at the epicenter of manufacturers’ focus.

Window cake boxes double up as a suitable storage and display solution for bakery products. These boxes are usually lined with greaseproof papers or coatings which helps in protecting the products during short-distance transport and storage. Window cake boxes are available with both hinged lids and removable lids. Hinged lid window cake boxes are likely to lead the chart in the global window cake box market, as these boxes are more convenient to use.

Window Cake Box Market: Dynamics

The sustainable and consumer-friendly attributes of window cake boxes are the key factors driving the global sales of window cake boxes. Consumers tend to incline towards window boxes as windows add an aesthetic appeal to the package, and helps the consumer in making purchase decisions. 

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

According to independent surveys, more than 50% of the consumers make food-related purchase decisions at the point of purchase, which is likely to be influenced by the aesthetics of the packaging. Also, re-closability and ease of carrying remain decisive factors while purchasing packaged goods. This consumer behavior is likely to offer lucrative opportunities to the global window cake box market through 2029.

Moreover, window cake boxes can be printed easily, which allows the manufacturers to build brand image among the consumer base. Other decorations such as embossing, printing, etc. can also be done on the window cake box surface to enhance shelf visibility. The aforementioned factors are expected to boost the worldwide sales of window cake boxes.  

Read More

Automotive Pedestrian Protection Vehicle System Market Review With Forecast Research Report 2019 – 2027

• Automotive pedestrian protection system refers to an essential safety feature that helps to alert the driver about crossing pedestrians and cyclist. The system also assists the driver and activates the brake of the vehicle through the ADAS (Advanced Driver Assistance System) in case of a frontal collision. Manufacturers design the vehicle to absorb maximum energy of an impact, thereby, avoiding injuries to the colliding object or pedestrian.
• Pedestrians include people who walk and also the bicyclists. Injuries tends to be severe when the pedestrian’s head strikes against the vehicle bonnet and windshield. This system ensures that the intensity of such an injury remains minimal.

Key Drivers of Global Automotive Pedestrian Protection Vehicle System Market

• Rising trend toward autonomous vehicles (AVs) is propelling the automotive pedestrian protection vehicle system. Presently, every vehicle manufacturing company is focused on improvement of vehicle safety. The pedestrian protection vehicle system employs sensors located behind the bonnet to ensure pedestrian safety. When the pedestrian strikes the vehicle, the acceleration sensor transmits a signal to the control unit, which lifts the bonnet up. Furthermore, an AV incorporates several systems including pedestrian protection vehicle system, lane assist, and ADAS system to enhance vehicle safety.
• Stringent regulations related to vehicle safety are further boosting the global automotive pedestrian vehicle system market. According to National Highway Traffic Safety Administration (NHTSA), U.S.A., in 2018, 36,600 people died owing to vehicle accidents. Therefore, government and regulatory authorities including NHTSA, United Nations Organization, and the European Commission have taken initiatives and enacted country-wide vehicle standards and legislations that mandate implementation of the pedestrian protection system in a vehicle in order to address the issue of increasing rate of accidental deaths.

For Right Perspective & Competitive Insights on Automotive Pedestrian Protection Vehicle System Market, Request for a Sample

Asia Pacific to hold prominent share of global automotive pedestrian protection vehicle system market

• Increasing research and development in technology of electric vehicles (EVs) and autonomous vehicle (AVs) in China, Japan, and India is fueling the pedestrian protection vehicle system market in Asia Pacific. Newly developed EVs and AVs are integrated with more number of safety systems such as ADAS, pedestrian protection system, and ABS.
• New entrants in the automotive market in China, India, Japan, and South Korea are likely to influence research and development of the pedestrian protection system in the automotive market in Asia Pacific. Statistics about pedestrian death in South Korea reveal that the pedestrian protection vehicle system is likely to play a vital role in the automotive industry in the country.
• Consequently, all factors mentioned above are likely to propel the automotive pedestrian protection vehicle system market in Asia Pacific.

Read More

Automotive Emergency Call system Market Sales and Insights by 2027

• Demand for automotive emergency call (eCall) system is attributed to a rise the demand for enhanced safety in vehicles. Several automakers including, Ford Motors, Toyota, Volkswagen, Volvo, Audi and BMW are incorporating the automotive emergency call system in their vehicles across different models.
• Automotive emergency call systems comprise an automated voice response that would be delivered to an emergency service provider via an auto call on an emergency number. An automated call is generated in response to either the deployment of airbags in vehicles, a vehicle crash, or vehicle breakdown. Furthermore, other information including vehicle geo-coordinates, vehicle model, and vehicle diagnostic information is sent over SMS through established communication to emergency service providers including medical, fire, and car service centers. This, in turn, enables the responsible organizations to deploy necessary help to the location of the vehicle crash.

Key drivers of global automotive emergency call system market

• Rise in demand for safety services from consumers is driving automakers to install eCall systems or emergency call systems in their vehicles, which in turn, is boosting the global automotive emergency call system market. An automotive emergency call system intends to help a consumer in case of vehicle breakdown or vehicle crash. In case of these emergencies, an eCall system establishes contact over an SMS, which contains vehicle geo-coordinates, vehicle model information, and vehicle diagnostics information. Furthermore, an automated voice message is sent to the emergency service provider via a call.

For Right Perspective & Competitive Insights on Automotive Emergency Call System Market, Request for a Sample

• After receiving the distress signal from a vehicle eCall system, the artificial intelligence system at the emergency service provider analyzes the data and determines the type of service to be deployed in order to help the respective vehicle. Subsequently, the AI system is expected to automatically generate a call to emergency service providers including medical centers, car service centers, vehicle towing services, and fire department, thereby resulting in timely dispatch or deployment of a service vehicle at the emergency spot.

• Stringent regulations and vehicle standards enacted by government organizations pertaining to vehicle safety are prompting automakers to install emergency call systems in their vehicles that are intended to automatically alert first-responder services whenever an accident or car breakdown occurs. Enhanced quality of emergency services and timely response of respective organizations enables service vehicles to reach the intended location and help drivers or occupants requiring assistance in case of vehicle crash or vehicle breakdown on time, preventing any probable fatalities.

Europe to hold a significant share of global automotive emergency call system market

• Rise in installation of eCall systems in vehicles due to government regulations and organizations, including the European Commission, in Europe are driving the automotive emergency call system market in the region. For instance, the European Commission has mandated all automakers to install eCall systems in new cars and vans manufactured from 2018 onwards. Furthermore, rising trend of joint ventures between automakers and emergency service providing organizations is propelling the automotive emergency call system market in Europe.

Read More

Litter Vacuum Cleaner Market Trends and Research Insights by 2027

• Litter vacuum cleaners, also known as industrial vacuum cleaners, are machines used for general cleaning in industrial environments. Industrial vacuum cleaners are typically made from steel and other metals having high filtration capacity. Such vacuum cleaners are ideal for extracting fine, dry dust as well as coarse materials such as shavings, scraps, and granules.
• Apart from industrial cleaning, litter vacuum cleaners are also used for commercial purposes, for example, leaf cleanup, cleaning and maintenance of commercial lots, parks, city streets, and highways.

Key Drivers of the Global Litter Vacuum Cleaner Market

• An increase in awareness about safety and hygiene at workplaces is fueling the demand for litter (industrial) vacuums worldwide. Various industries have their own set of challenges, especially the fine and dry dust particles that significantly impact an employee’s health. Thus, vacuum cleaners having strong suction capacity are preferred for industrial usage. The Occupational Safety & Health Administration (OSHA) under the United States Department of Labor has clearly underlined the standards required to be maintained for treating combustible dust. Hence, industrial vacuum manufacturers offer their product portfolio keeping in mind the OSHA standards.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

High Machinery Cost and Heavy Structure to Hamper the Market

• High machinery cost associated with the litter vacuum machines is one of the key retraining factors of the litter vacuum cleaner market. Affordability of such machines in various emerging countries is expected to negatively impact the growth of the litter vacuum cleaner market. Additionally, huge size of vacuum cleaners sometimes hinders the growth of the market as such structures often require frequent maintenance. All these factors hamper the growth of the litter vacuum market.

Merger & Acquisitions of Key Global Players to Offer Attractive Opportunities for Growth of the Litter Vacuum Cleaner Market

• Mergers & acquisitions of key global players in emerging economies are anticipated to offer key business opportunities for the growth of the litter vacuum cleaner market. Merger & acquisition are also likely to help in increasing the geographical presence, thereby resulting in overall growth of the litter vacuum cleaner market.

Read More

Bath & Body Products Market Trends and Research Insights by 2027

• The bath & body products market study focuses on commodities that are used by consumers for bath & body care purposes. Shower gels, soap bars, bath bombs, body butter, body lotions, and body sprays are some of the products belonging to this group.
• A gradual shift has been noticed in adoption of organic and cruelty-free personal care products instead of conventional products, as consumers continue to become more conscientious regarding their lifestyle choices, further resulting in transformation of traditional notions of beauty and personal care
• In addition, consumers these days are also proactively taking responsibility of their well-being, which in response has led to emergence of bath & body care categories such as anti-pollution, sleep, and self-care
• Demand for bath & body  products composed of organic and natural ingredients is expected to bolster in the coming years

Growing Demand for Eco-Friendly Bath & Body Products to Drive the Global Market

• In the past five years, production of vegan bath & body products experienced growth of more than 170%.
• Emphasis on organic credentials is the key strategy adopted by majority of manufacturers worldwide, and has enabled them to keep pace with the changing consumer preferences influenced by the transforming lifestyle of the masses
• In the year 2018, it was found that nearly 40% of the population in the U.K preferred to buy natural and organic body care products, because according to them, these products were better for the environment.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report

Growth Opportunities for the Market Aligned with Rising Trend of Premiumization in Developing Nations

• Premiumization coupled with expansion of luxury products in Canada, China, India, and some of the Latin American provinces is likely to create new opportunity for products that offer more health and wellness benefits
• Although luxury bath & body products account for smaller share, they are likely to attain noteworthy growth pace owing to growing count of affluent shoppers, channel expansion, and premiumization

Read More